Front suspension continues

Today I squeezed the polybushed front track control arms into the crossmember and fixed the Koni front legs into the new 3 door hubs. I put new extended wheel studs into the front hubs. Next job for the suspension is to get new springs for front and back to raise the car by half an inch, and make the suspension stiffer. I also need to refit the crossmember and ARB and then refit the front brakes. All this after I have refitted the sump with new gasket and new baffle.

Here's the crossmember with the polybushed track control arms fitted, and the Koni legs now attached to the 3 door hubs with long wheel studs fitted.